Training Center

What to do when detection has been programmed but it is not being displayed in the Video Tab.

There are 5 configurations. This Tutorial covers how to switch configurations using the Time of Day feature.

This tutorial covers the basic steps in setting Collision Avoidance using the radar detection.

This tutorial explains the different modules that can appear in the detection dropdown list when selecting an Output or Input Channel.

Apex and Next have several added benefits such as Automatic Counts, Phases, & PedTrax. These items can be displayed on the video screen or hidden.

How to set up a New Device in Apex, Next & Radius. A device is the Detection Unit in the cabinet.

This Tutorials focus is primarily on the Ped Alarms in the Settings Tab.

This tutorial focus is primarily on the Option settings. Options are ways to modify the algorithm for special cases. Check with Iteris Product Support before modifying.

This tutorial covers the basic but important Field of View requirements for good detection performance.

Sending count data to a controller is beneficial if you have a software system in place that collects and organizes data from the controller.

When a Vector radar head and video sensor have different detection patterns, it can be beneficial to decouple the Radar Sensor.

This tutorial covers enabling SDLC and not duplicating a detector groups address.

This tutorial will cover some basic settings that may prevent the radar from outputting calls to the controller.

Basic setup procedures for setting up manual count zones and things to watch out for.

Use alternative ways to set up Protective Permissive Left-Turns by placing clearance detection at the stop line.