2.3.3.1–Provide Commercial Vehicle Checkstation Communications (Pspec*)
This process shall be responsible for providing an interface through which a commercial vehicles roadside checkstation facility can communicate with a passing commercial vehicle. To process on-board data or driver log information, the process collect the data from an identified commercial vehicle or all vehicles in the vicinity as they enter a trigger area for wireless roadside inspection (WRI). The data received by the process from the vehicle shall be stored in the store of collected data for use by the roadside inspection process. This process shall receive configuration data to manage the inspection process. This process shall react to control commands provided by the commercial vehicle administrative functions when to start and end inspection activies.This Pspec is associated with the Commercial Vehicle Check Subsystem*.
This Pspec is associated with the following Equipment Packages*:
- Citation and Accident Electronic Recording
- Roadside Electronic Screening
- Roadside Safety and Security Inspection
Data Flows*:
- cv_disable_info--In
- cv_get_on_board_data--In
- cv_inspection_data--In
- cv_inspection_data_output--Out
- cv_on_board_data--In
- cv_roadside_collected_data--Out
- cv_roadside_driver_logs_for_admin--Out
- cv_roadside_inspection_configuration--In
- cv_roadside_inspection_control--In
- cv_roadside_safety_data_for_admin--Out
- cv_trigger_area_notification--Out
- cvo_driver_log--In
- fdic-driver_information--In
- freight_info_for_inspection--In
- stored_driver_identity_characteristics--In
