2.6.1–Provide Commercial Vehicle Manager Tag Data Interface (Pspec*)This process shall be responsible for providing an interface through which the commercial vehicle fleet manager can set up the data in the tag on-board a commercial vehicle. This process enables the manager to write to the tag with information that identifies the trip identification number, carrier, driver and vehicle. The process shall also enable the manager to read only this data from the tag and will be prevented from reading of any other data from the tag. Data provided by the manager shall also be sent by the process to the tag the process that manages electronic credentials and tax filing for use by the manager in future enrollments. The process shall support inputs from the commercial vehicle fleet manager in both manual and audio form, and shall provide its outputs in audible and visual forms. It shall enable the visual output to be in hardcopy, or as a display.
This Pspec is associated with the Fleet and Freight Management Subsystem*.
This Pspec is associated with the following Equipment Packages*: